Copyright © 2018 Qilu Animal Health Products Co., Ltd.  All rights reserved.  鲁ICP备16014465号-1



Page view:
Product name


I want to make an inquiry

1. Name of product

ProteQTM  -- Compound Potassium Peroxymonosulphate Powder

2. Dosage form of the product

Light red granular powder for disinfectant.

3. Route of administration

Surface and Equipment Disinfection

Water Systems Disinfection

Disinfectant Foot Dips Preparation and Use

Aerial Disinfection

4.Composition, content of active substances in formulation of the products

Potassium peroxymonosulphate      50%-60%

Sodium chloride                               1.5%-3%

Other ingredients                          37%-48.5%

Total                                                       100%

Equivalent to available chlorine       10.0%             

5. Pharmacological characteristic of the products

Compound Potassium Peroxymonosulphate Powder is effective against numerous microorganisms affecting animals: viruses, gram positive and gram negative bacteria, fungi (molds and yeasts) and mycoplasma.

6. Indication of treatment, dosage for use and contraindication


ProteQTM is Effective against the following pathogens

Bacteria:Actinobacillus pleuropneumoniae, Bacillus cereus, Brucella abortus, Campylobacter jejuni, Clostridium perfringens, Dermatophilus congolensis, Escherichia coli, Klebsiella pneumonia, Mycoplasma gallisepticum, Mycoplasma hyopneumonia, Pasteurella multocida, Pseudomonas aeruginosa, Salmonella enterica, Salmonella typhimurium, Shigella sonnei, Staphylococcus aureus, Staphylococcus epidermidis, Streptococcus pyogenes, Streptococcus suis.

Viruses: African Swine fever Virus, Avian Laryngotracheitis Virus, African Swine Fever Virus,  Bovine Adenovirus Type 4, Canine Adenovirus (Canine Hepatitis), Canine Parvovirus, Equine Herpes Virus (Type 1), Equine Herpes Virus (Type 3), Equine Influenza Virus (Type A), Feline Calicivirus, Feline Panleukopenia Virus, Feline Rhinotracheitis Virus, Foot and Mouth Disease Virus, Newcastle Disease Virus, Simian virus (SV40 Virus).

Fungi: Trichophyton mentagrophytes (2%)

6.2Dosage and Administration

6.2.1Surface and equipment disinfection

For Routine Disinfection for all surfaces such as earth, wood, and concrete. All farm equipment must be thoroughly cleaned and disinfected prior to use or transfer between sites to remove any potential disease-causing organisms and cross contamination.

Dilution rate: 10 gm of ProteQTM to 1 L of tap water (1:100)  

Application: Using a pressure washer or other mechanical sprayer, at an application rate of 300 mL/m2

To estimate the total surface area to be disinfected, including walls and ceilings, multiply the total floor area by 2.5.

Surface Area to be Disinfected (m2)

Volume of Water Required (L)

Dilution Rate

Routine Disinfection and UK DEFRA General Orders 1:100 (1%)

1:200 (0.5%)


Diseases of Poultry Orders 1:280

Quantity of ProteQTM to be added



150 g

75 g

54 g



300 g

150 g

107 g



1.5 kg

750 g

536 g



3 kg

1.5 kg

1.071 kg



7.5 kg

3.75 kg

2.68 kg


6.2.2Water systems disinfection

All water systems can potentially contain some viral and bacterial contamination, especially header tanks where dust and debris can accumulate. Disinfection will clean the system and eliminate viruses, bacteria and fungal growth.

Water System Disinfection

Dilution Rate


Terminal Disinfection

1:200 - 1:100

Isolate header tank at the mains and drain off to drinker points farthest from tank. Clean out any gross soiling and debris. Refill with water and add the appropriate volume of ProteQ powder, thoroughly stir and leave for 10 minutes. Flush system through to all drain-off points and leave for a further 50 minutes before draining system and refilling with clean water.

Continuous Disinfection


Dose header tank as required or apply through water system dosing equipment.

Water System Disinfection Application Usage Chart

Liters of Water to be Disinfected (L)

Dilution Rate

Terminal 1:200

Cleanout 1:100

Continuous Water Disinfection 1:1000

Quantity of ProteQTM to be added


500 g

1 kg

100 g


12.5 kg

2.5 kg

250 g


2.5 kg

5 kg

500 g


5 kg

10 kg

1 kg


6.2.3Disinfectant foot dips preparation and use

Disinfectant foot dips act as a demonstrable and highly visible sign that biosecurity and disease prevention is taken seriously. It help prevent disease transfer onto and around farm sites.

-Place foot dips at all main farm/site entrances, and at entrances to farm buildings and ensure that all personnel and visitors use them.

-Replace solution once it has either become soiled or after a period of 4-5 days.

-How to Use a ProteQ Disinfectant Foot Dip

(1) Using a stiff bristled hand brush, remove as much organic matter as possible from the boots remembering to pay particular attention to the sole.

(2) Place boot into the foot dip and scrub using a soft hand brush making sure that the whole boot is washed thoroughly with disinfectant solution and paying particular attention to the sole.

(3) Replace disinfectant solution on a daily basis disposing of soiled disinfectant responsibly around the farm.

-How to Make a ProteQTM Disinfectant Foot Dip

Fill a suitable container with water adding 50 g of ProteQTM to every 5 L of water (1:100 dilution rate), stir until dissolved.

Provide two hand brushes with every foot dip. One to remove organic matter prior to disinfection and one to use within the foot dip to wash the boot with.

6.2.4Aerial disinfection

-Misting, Aerial Spraying, Cold and Thermal Fogging:

To control organisms that can be introduced into a building during the setting up procedure, and to disinfect inaccessible areas of the building and the air, use either a fine mist sprayer or thermal fogging machine to apply ProteQTM disinfectant solution evenly.

Aerial Disinfection

Dilution Rate


Misting/Aerial Spray


Using either a pressure washer or knapsack sprayer on its finest mist setting and apply at 1 L of ProteQ solution per 10 m2 of floor space.

Cold Fogging


Use a mechanical mister to apply the ProteQ solution at a rate of 1 L per 10 m2 of floor space.

Thermal Fogging

1:25 (4%) solution in an 85:15 water ProteQTM Fog Enhancer mixture

Using a thermal fogging machine apply the prepared solution at 1 L per 40 m2 of floor space.

-Aerial Disinfection in the Presence of Livestock:

ProteQTM can be misted in the presence of livestock or poultry at a dilution rate of 1:200 (0.5%). (*A cold fogger or mister should be used, as the noise of a thermal fogger may disturb the animal’s behavior.)



7. Warnings when using

Solutions are stable for 7 days.

Do not soak metal objects in ProteQ for long periods – 10 minutes is maximum necessary contact time.

8. Warnings for drug users to prevent and treat animal diseases

* Keep out of reach of children.

*The product is strongly acidic, corrosive and attacks eyes and skin. Will irritate the nose and throat. Avoid contact with eyes and skin. Do NOT inhale dust.

*When opening the container and preparing dip or wash, wear cotton overall buttoned to the neck and wrist (or equivalent clothing), elbow length PVC gloves, a PVC or rubber apron, face shield and impervious footwear.

*If product is spilled on skin immediately wash area with soap and water. If in eyes immediately wash it out with water. Wash hands after use. After each day’s use wash gloves, face shield and contaminated clothing.

9. Information about using the product

It is used to be mixed with water, and the concentration of the solution refer to the instructions.

Solutions are stable for 7 days.

10. Storage

Store in a cool dry place.

11. Shelf life

36 months.

12. How supplied

250g, 1kg

13. Full name and address of the manufacturer


No.243, Gongye North Road, Jinan, Shandong, China


Corresponding parameter set not found, please add it in property template of background


Previous article
Next article

Share to: